Roland MC-707 GROOVEBOX - Manual (Page 4)

4
1 Common Section 1
[VOLUME] knob
Adjusts the volume of the MIX OUT jacks.
[PHONES] knob
Adjusts the volume of the PHONES jack.
[SHIFT] button
When you hold down the [SHIFT] button and press a button
that’s labeled with a function name (such as ), that
function is executed.
[CLEAR] button
Pressing the [CLEAR] button in conjunction with another button,
you can clear the recorded content of the step sequencer or a
phrase.
[PROJECT] button
Accesses the project menu screen.
Here you can load a project and make settings for it.
[QUANTIZE] button
Accesses the quantize screen.
& For details, refer to “Reference Manual” (PDF).
[REC] button
Turns recording on/off for your performance using the pads (p.
11).
MOTION [ON] [REC] buttons
Lets you record knob movements for each clip, and play them
back as motions.
MOTION [ON] button
Plays back a recorded motion.
By holding down the
[SHIFT] button and pressing the MOTION
[ON] button , you can delete a motion.
MOTION [REC] button
Records a motion.
By holding down the
[SHIFT] button and pressing the MOTION
[REC] button , you can edit the LAST STEP. (*1)
* 1 LAST STEP: The loop end setting that you can specify for each clip.
SCENE [1]–[4] buttons
The combination of clips being played back by the tracks of the
MC-707 is called a “scene.”
You can recall a stored scene by pressing a SCENE [1] – [4] button .
By holding down the [SHIFT] button and pressing a SCENE [1] – [4]
button you can recall scenes 5–8.
To store the current settings as a scene, long-press the SCENE
button in which you want to store the settings.
To store the settings in a scene 5–8, hold down the
[SHIFT]
button and long-press a SCENE button.
MEASURE [<] [>] buttons
Move to the measure that you want to edit.
If you hold down the
[SHIFT] button and press a MEASURE [<] [>]
button , the measure length edit screen appears.
& For details, refer to “Reference Manual” (PDF).
Measure display indicators
The four indicators show the measure that you’re editing.
[START/STOP] button
Starts or stops playback.
2 Mixer Section
Playback position indicators
These indicate the playback position of the clip as a percentage
(%).
One indicator means 25%, and all indicators lit mean 100%.
[FILTER] knob, [MOD] knob, [FX] knob
These knobs adjust the assigned parameters.
Level faders
Adjusts the volume.
[SEL] buttons
Selects a track.
If you hold down the
[SHIFT] button and press a [SEL] button , the
track setting menu appears.
& For details, refer to “Reference Manual” (PDF).
Top Panel
Panel Descriptions
1
2
3
4
5
Measure display
indicators
Playback position
indicators