Roland MC-707 GROOVEBOX - Manual (Page 12)

12
Editing Settings
Here’s how to edit the settings of this unit.
1.
Hold down the [SHIFT] button and press the [KNOB ASSIGN]
button .
The UTILITY screen appears.
2.
Note what is shown in the screen, and then execute.
& For details, refer to “Reference Manual” (PDF).
Returning to the Factory Settings
(Factory Reset)
Here’s how to return the settings of this unit to their factory-set state.
3
2
1
1.
Hold down the [SHIFT] button and press the [KNOB ASSIGN]
button .
The UTILITY screen appears.
2.
Use the cursor buttons to choose “FACTORY RESET.”
3.
Press the [ENTER] button .
A confirmation message appears.
4.
Note what is shown in the screen, and then execute.
* Factory reset does not restore the contents of the SD card to their factory-
set state. For more about the data that was on the SD card when shipped
from the factory, refer to the following URL.
& https://www.roland.com/support/
* If you want to back up the contents of the SD card included with the
MC-707 to your computer, use your computer to save the contents on
other media.
Using a New SD Card
If you’re using a new SD card, you must first format it on the MC-707.
5
4
3
1
1.
Remove the screws of the SD card protector (rear panel).
The SD card protector is fastened with screws. To remove the card
protector, use a Philips screwdriver to remove the screws.
2.
Replace the SD card.
Attach the SD card protector as necessary.
* While the screen shows “Executing,” never turn off the power or remove
the SD card.
3.
Hold down the [SHIFT] button and press the [KNOB ASSIGN]
button .
The UTILITY screen appears.
4.
Use the cursor buttons to choose “FORMAT SD CARD.”
5.
Press the [ENTER] button .
A confirmation message appears.
6.
Note what is shown in the screen, and then execute.
Making Various Settings