Roland MC-707 GROOVEBOX - Manual (Page 10)

10
Loading and Playing a Project
On the MC-707, data for one song is handled as a unit called a “project.”
Projects are saved on the SD card.
1
4
1.
Press the [PROJECT] button .
2.
Select “LOAD.”
3.
Load the project.
4.
Press the [START/STOP] button .
The project plays.
Switching Clips
(CLIP Mode)
1
2
1.
Press the PAD MODE [CLIP] button .
The pads are now in CLIP mode.
You can choose the clips that are played by the pads.
2.
Press a pad and select a clip.
The clip is switched.
Selecting a Tone or Drum Kit
1
3
1.
Press the PAD MODE [CLIP] button .
The pads are now in CLIP mode.
2.
Press a pad to select the clip whose tone or drum kit you
want to change.
Now you can edit the selected clip.
3.
Press the [SOUND] button .
The sound browser screen appears.
MEMO
You can also specify a tone or drum kit for the track and use it.
4.
Select a tone or drum kit as directed by the screen.
Loading a Clip from SD Card
1
2
4
1.
Stop playback.
Make sure that the [START/STOP] button is blinking.
If the [START/STOP] button is lit, press the [START/STOP] button to
stop playback.
2.
Press the PAD MODE [CLIP] button .
The pads are now in CLIP mode.
3.
Press a pad to select an empty clip as the loading-
destination.
4.
Press the [CLIP] button .
The clip browser screen appears.
5.
Select a clip.
The clip is loaded.
Performing and Producing