Roland V-8HD HDMI Video Switcher - Manual (Page 7)

7
Video Operations
Specifying a SPLIT Composition Pattern
This makes the settings for the split composition pattern to match
the video you want to composite.
1. Press the [MENU] button 0 “SPLIT/VFX” 0 select
“SPLIT/VFX A” or “SPLIT/VFX B,” and press the
[VALUE] knob.
2. Turn the [VALUE] knob to select “SPLIT/VFX TYPE,”
then press the [VALUE] knob.
3. Turn the [VALUE] knob to select the SPLIT type,
then press the [VALUE] knob.
You can select “SPLIT H” or “SPLIT V.”
* For more about the SPLIT types and effects, refer to “Reference
Manual” (PDF).
4. Press the [MENU] button to quit the menu.
Compositing Using SPLIT
1. Press a Cross-point A [1]–[8] button to select the
video you want to display above or on the left.
2. Press a Cross-point B [1]–[8] button to select the
video you want to display below or on the right.
3. Press the SPLIT/VFX [A] or [B] button to turn on
SPLIT (lighted).
The video you selected in steps 1 and 2 is composited.
4. Turn the SPLIT/VFX [A] or [B] knob to adjust the
display position of the video.
MEMO
By turning the knob while pressing it, you can adjust the position
of the dividing line between the two videos.
5. To turn off SPLIT, press the SPLIT/VFX [A] or [B]
button once again.
Compositing Video with Split (SPLIT)
This composites two video streams in a split screen.
The final output video is displayed above or on the left, and the
preset video (the video to be output next) is displayed below or on
the right.