Roland VC-1-HS HDMI to SDI Video Converter - Manual (Page 15)

15
Names of Things and What They Do
Rear Panel
fig.rear-panel.eps
1 2 3 4
1. DC IN Connector and Indicator
Connect the included AC adapter. The indicator lights up when the VC-1-HS is
receiving power.
2. AUDIO IN Connectors and Indicator
Connect a mixer or other audio sources. You can use the mode switches (MODE SW)
to switch between analog input and AES input (p. 22).
* The VC-1-HS can output video and audio together (embedded audio feature).
3. HDMI THRU/OUT Connector and Indicator
Connect a TV monitor or other HDMI output equipment.
You can use the mode switches (MODE SW) to select the output signal (p. 22). You
can select pre or post of audio embedding.
4. HDMI IN Connector and Indicator
Connect a video camera or other HDMI source equipment.
Side Panel
fig.side-panel.eps
Mode Switches (MODE SW)
These set the VC-1-HS’s operation mode. Refer to “Setting the Operation Mode” (p. 22).
* Use a fine-pointed pen or similar object to change the setting of a switch.