Server network settings, Connect to server, Magicinfo mode – Samsung UHD Signage Player Box User Manual
Page 54: Server access, Ftp mode, Proxy server, Device name, Server network settings 54, Device name 54
54
Server Network Settings
m
MENU
→
Network
→
Server Network Settings
→
E
Connect to server
Connect to MagicInfo server.
•
Server Address
/
TLS
/
Port
"
If you do use the
TLS
option, the server is configured to use https and data transfer is
encrypted. (Port number: 7002)
"
If you don't use the
TLS
option, enter the server IP address and port number. Use 7001 as
the port number. (If you are unable to connect to the server using port number 7001, check
with your server administrator to find the correct port number and then change the port
number.)
"
Enter the server IP address and port number. Use 7001 as the port number. (If unable to
connect to the server using port number 7001, check with your server administrator to find
the correct port number and then change the port number.)
"
For the MagicInfo Server user guide, visit the following website: http://displaysolutions.
samsung.com → Support → Resources → MagicInfo Web Manual.
MagicInfo Mode
Select the appropriate
MagicInfo Mode
depending on the environment where you are using the
product.
•
Lite
/
Premium
Server Access
Allow or deny access to MagicInfo server.
•
Allow
/
Deny
FTP Mode
Specify the FTP operating mode.
•
Active
/
Passive
Proxy server
Set up your proxy server connection and related functions.
Off
/
On
•
Address
/
Port
/
ID
/
Password
"
Address
/
Port
/
ID
and
Password
are enabled only when
Proxy server
is set to
On
.
Device Name
m
MENU
→
Network
→
Device Name
→
E
Select or enter a device name.
This name can be shown on network device over the network.
•
[Signage] Display 1
~
6
/
User Input