beautypg.com

Samsung HW-Q600B 3.1.2-Channel Soundbar System User Manual

Page 10

background image

ENG - 10

SOUND

MODE

WOOFER

TONE

CONTROL

CH LEVEL

CH LEVEL

By pressing the button, you can adjust the volume of the each speaker.

Press the button to select

CENTER LEVEL

or

TOP LEVEL

and then adjust the volume

between -6~+6 by using the

Up/Down

buttons.

If the Rear Speakers (sold separately) are connected, the setting

REAR LEVEL

is

supported. To adjust the volume of the

REAR LEVEL

between -6 to +6 by using the

Up/

Down

buttons.

SOUND

MODE

WOOFER

TONE

CONTROL

CH LEVEL

Sound Control

By pressing the button, you can set the audio function. The desired settings can be
adjusted using the

Up/Down

buttons.

VOICE ENHANCE ON/OFF

NIGHT MODE ON/OFF

AUDIO SYNC

VIRTUAL ON/OFF

VOICE ENHANCE ON/OFF

This mode is makes it easier to hear spoken dialog in movies and TV.

NIGHT MODE ON/OFF

This mode is optimized for nighttime viewing with the settings adjusted to bring the
volume down but keep the dialog clear.

AUDIO SYNC

If the video on the TV and audio from the Soundbar are not synchronized, press the

(Sound Control)

button to select

AUDIO SYNC

and then set the audio delay

between 0~300 milliseconds by using the

Up/Down

buttons. (Not available in “

USB

or “

BT

” mode.)

VIRTUAL ON/OFF

Dolby Virtual function can be turned

ON/OFF

.

The

VOICE ENHANCE

,

NIGHT MODE

, and

VIRTUAL

audio function can be turned

ON/

OFF

by using the

Up/Down

buttons. (

VIRTUAL

function is not available in “

USB

” or “

BT

mode.)

Press and hold the

(Sound Control)

button for about 5 seconds to adjust the sound

for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are
selectable using the

Left/Right

buttons and each can be adjusted to a setting between

-6 to +6 using the

Up/Down

buttons. (Make sure the Sound mode is set to “

STANDARD

”.)

SOUND

MODE

WOOFER

TONE

CONTROL

CH LEVEL

Bluetooth

PAIR

Switch the Soundbar to Bluetooth pairing mode.
Press the

PAIR

button and wait for the “

BT PAIRING

” screen to connect to a new

Bluetooth device.

Play / Pause

VOL

WOOFER

SOUND

MODE

PAIR

You can also play or pause music by pressing the button.