Care & maintenance, In-1 dust compartment with water tank and filter, Pausing – Xiaomi Robot Vacuum E10 User Manual

Page 11: Adding water or cleaning the mop pad, Docking & charging, Dnd mode

CAUTIONS:

Do not rinse or soak the 2-in-1 dust compartment with water tank.

Regularly clean the 2-in-1 dust compartment with water tank to prevent dirt buildup. This

will help maintain optimal performance.

2-in-1 Dust Compartment with Water Tank and Filter

Care & Maintenance

When the robot vacuum is running, press any button to pause. Press the

button to resume cleaning.

Note:

The robot vacuum will enter sleep mode after being paused or in standby mode for

five minutes. Press any button to wake it up.

Pausing

When the robot vacuum is working, pause it first then remove the 2-in-1 dust

compartment with water tank to add water or clean the mop pad. Then

reinstall the 2-in-1 dust compartment with water tank and press the button

to resume the task.

Adding Water or Cleaning the Mop Pad

When the robot vacuum is working, press the button to pause the task, and

press the button again to send the robot vacuum to return to the dock to

charge.

When the robot vacuum is in standby mode and not connected to the charging

dock, press the button to send the robot vacuum to return to the dock to

charge. When a task is complete or the battery is too low, the robot vacuum will

automatically return to the dock to charge.

Docking & Charging

Note:

When using the robot vacuum for the first time, it is recommended to follow the robot

vacuum and remove any obstacles on the ground. If the robot vacuum may get stuck or

scratch the surface of the furniture in some areas, you can set physical barriers to prevent

the robot vacuum from entering those areas.

In the do not disturb (DND) mode, the robot vacuum does not perform

scheduled cleanups, and the indicator turns off after one minute of charging.

The DND mode can be enabled or disabled in the app.

Note:

For more functions, please go to the app.

DND Mode

1. Take out the 2-in-1 dust compartment with water tank and open its cover.

Remove any debris and clean the 2-in-1 dust compartment with water tank

with the cleaning brush.

2. Remove the filter and clean it with the cleaning brush.

Note:

The filter can be rinsed with water. Make sure it is completely dry before

reinstalling. Frequent rinses are not recommended.