How to use – Xiaomi Robot Vacuum E10 User Manual

Page 10

How to Use

If only vacuuming function is needed, please remove the

mop pad holder.

Start Vacuuming & Mopping

1. Press and hold the release button to remove the 2-in-1 dust compartment

with water tank. Open the plug, fill the tank with clean water, and then

refasten the plug. Install the 2-in-1 dust compartment with water tank onto

the robot vacuum until it firmly clicks into place.

3. Install the 2-in-1 dust compartment with water tank into the robot vacuum.

Press the button to start vacuuming and mopping.

2. Before using the vacuuming & mopping function, dampen the mop pad and

wring it out and then install it onto the mop pad holder.

Install the mop pad holder to the 2-in-1 dust compartment with water tank,

as illustrated.

CAUTIONS:

Please remove the 2-in-1 dust compartment with water tank before adding water. Do not

add liquids such as hot water, detergent, or disinfectant to prevent damaging the robot

vacuum.

Due to production testing, the 2-in-1 dust compartment with water tank may have water

stains, which is normal.

CAUTION:

Remove the 2-in-1 dust compartment with water tank and pour out the leftover

water in a timely manner after a mopping task has been completed. Then clean and dry the

mop pad to prevent odor and mildew.

Open the plug and

add water.

Release Button

Pull the holder out as

illustrated