Roborock S5 Max CE - Manual (Page 22)

Instructions for use
More app functions
Note:
Functions and details of the app may vary slightly due to continuous app
development and upgrades.
Change Cleaning Mode
Real-Time Map Updates
View Cleaning History
Change Robot Voice
Firmware Update
Part Replacement
Schedule
Carpet Boost
Remote Control
View robot status
Do Not Disturb
(DND) mode
Robot Location
Invisible Wall
No-go zones Mopping No-Go Zone
Refilling the water tank or cleaning the
mopping cloth midway
To refill the water tank or clean the mop cloth during a
cleanup, pause cleaning by pressing any button and remove
the mop module. Refill the water tank and/or clean the mop
cloth as required. Reinstall the mop module and press the
button to continue cleaning.
20
No-go zones / Invisible Wall / Mopping
No-Go Zone
The app can be used to draw Virtual No-Go Zones and Walls,
as well as Virtual No-Mop Zones and Walls to keep the robot
from entering the areas you define. Virtual No-Mop Zones
and Walls are only activated when the mopping cloth
bracket is installed.
Note:
• "Map Saving Mode" must be turned on in the app to use virtual no-go zones.
• Virtual no-go zones and walls should only be used to customize the cleaning
area. They should not be used to isolate hazards.
• Moving the robot manually or making significant changes to the home
environment may cause the loss of Virtual No-Go Zones and Walls.