Roborock Q7 Max FCC - Manual (Page 9)

09
When the robot returns to the dock after
cleaning, press the latches on both sides,
and slide the mop cloth mount backwards
to remove it.
Notes:
• Wash the mop cloth after each use, and regularly
empty the water tank of unused water.
• Remove the mop cloth mount when not mopping.
B3-6—Remove the mop cloth mount
❷ Reset WiFi
1. Open the upper cover and find the WiFi
indicator.
Open the Roborock App, tap the “Search for
device” button, or open Mi Home app, tap “+”
in the top right corner and add the device
as instructed in the app.
Notes:
• The actual process may vary due to ongoing app
updates. Follow the instructions provided in the app.
• Only 2.4 GHz WiFi is supported.
❸ Add device
If you cannot connect to the robot due to your
router configuration, a forgotten password, or any other
reason, reset the WiFi and add your robot as a new device.
Note:
2. Press and hold the and buttons until
you hear the “Resetting WiFi” voice alert. The
reset is complete when the WiFi indicator
flashes slowly. The robot will then wait for a
connection.
Instructions
The robot cannot be turned off when it is being
charged.
Note:
Press and hold the button to turn on the
robot. The power indicator will turn on and
the robot will enter standby mode. Press
and hold the button to turn off the robot
and complete the cleaning cycle.
On/Off
Press the button to start cleaning. The
robot will plan its cleaning route according
to its scan of the room. It splits a room into
zones, first draws out zone edges, and then
fills the zone in a zigzag pattern. In doing
so, the robot cleans all zones one by one,
efficiently cleaning the house.
Starting Cleaning
Option 2: Search for “Mi Home” in the App
Store or Google Play or scan the QR code to
download and install the app.
Connect to the App
Option 1: Search for “Roborock” in the App
Store or Google Play or scan the QR code to
download and install the app.
❶ Download App
This robot supports both Roborock and
Mi Home apps. Choose the one that best
meets your needs.
Zone 1 –
Cleaned
Zone 4 –
Next Zone
Zone 2 –
Cleaned
Zone 3 –
In Progress
Clean the mop cloth after 60 minutes of mopping
to maintain water flow and cleaning quality.
Note: • If the robot waits more than 1 hour for a connection,
WiFi will be automatically disabled. If you want to
reconnect, reset the WiFi before proceeding.