Roborock Q7 Max FCC - Manual (Page 12)

12
C7
Robot Sensors
Use a soft, dry cloth to wipe and clean all
sensors, including:
C7-1—Dock Locator
C7-2—Wall Sensor
C7-3—Four Cliff Sensors
* Clean monthly
C8
Charging Contact Areas
Use a soft dry cloth to wipe the charging
contacts on the charging dock and the robot.
* Clean monthly
Purchase an additional filter and alternate if
necessary.
Note:
C6
Mop Cloth
* Clean after each use and replace every 3-6 months
Remove the mop cloth from mop cloth
mount. Clean the mop cloth and air-dry it.
A dirty mop will affect the mopping performance.
Clean it before use.
Note:
Battery
The robot is equipped with a high-performance
lithium-ion rechargeable battery pack. To
maintain battery performance, keep the robot
charged during normal use.
If the robot will be left unused for a long period,
turn it off and charge it at least every three months to
avoid battery damage caused by over-discharge.
Note:
Basic Parameters
Robot
Q380RR Model
14.4V/5200mAh
lithium-ion battery
Battery
Approx. 3.7kg (8.16 lbs) Weight
The serial number is on a sticker on the underside
of the robot.
Note:
< 6 hours Charging Time
20VDC 1.2A Rated Input
Charging Dock
14.4V/5200mAh
lithium-ion battery
Charging Battery
CDZ11RR or CDZ12RR Model
28W Rated Power
100-240V~ Rated Input
20VDC 1.2A Rated Output
50-60Hz Rated Frequency