Pla y ba ck 88 – Ricoh Pentax КP User Manual

Page 90

Pla
y

ba
ck

Set the parameters.

Available operations

Press E.

The screen of Step 3 reappears.

Press E.

The save confirmation screen appears.

Select [Apply additional filter(s)] or [Save] and
press E.

Select [Apply additional filter(s)] when you want to apply
additional filters to the same image. The screen of Step 3
reappears.

Caution

• Only JPEG and RAW images captured with this camera can

be edited with the digital filters.

• RAW images captured using HDR Capture or Pixel Shift

Resolution cannot be processed with Digital Filter.

Memo

• Up to 20 filters, including the digital filter used during shooting

(p.75), can be applied to the same image.

Retrieves the filter effects of the selected image and applies the
same filter effects to other images.

Display a filter-processed image in single image
display.

Select [Digital Filter] in the playback mode
palette.

Select [Recreating filter
effects] and press E.

The filter effects used for the
selected image appear.

To check the parameter
details, press G.

Press G again to return to the
previous screen.

Press E.

The image selection screen appears.

Use Q to select an
image for applying the
same filter effects, and
press E.

You can only select an image
that has not been processed with
a filter.
The save confirmation screen appears.

Select [Save] and press E.

Memo

• If [Searching for original image] is selected in Step 3, the

original image prior to digital filter application can be
retrieved.

Selects a parameter.

Adjusts the value.

Brightness

Cancel

Recreating Filter Effects

Applying the digital filter

Recreating filter effects

Searching for original image

100-0001

16--

Reapplies following digital filter

effects from previous image

Details

100-0001

Performs digital filter

processing to this image