Ricoh Pentax КP - Manual (Page 60)

3
Shoo
ting
58
Available operations
3
Press E.
The camera returns to standby mode.
4
Press 1.
The built-in flash is popped up.
t Memo
• The flash modes that can be selected vary depending on the
capture mode.
• You cannot take pictures while the built-in flash is being
charged. If you want to take pictures while charging the flash,
set [8 Release While Charging] in the E2 menu.
• Depending on the lens being used, the use of the built-in flash
may be limited. (p.117)
• When the built-in flash is used in J mode, the shutter speed
automatically changes over a range from 1/180 seconds to a
slow shutter speed depending on the lens being used. The
shutter speed is locked at 1/180 seconds when a lens other
than a DA, DA L, D FA, FA J, FA, or F lens is used.
• When the built-in flash is used in I, K, or L mode, any
desired shutter speed of 1/180 seconds or slower can be set.
• The built-in flash is optimum for a subject at a distance from
approx. 0.7 m to 5 m. Vignetting may occur when used at a
distance closer than 0.7 m (this distance varies slightly
depending on the lens being used and the sensitivity setting).
• For details on the use of external flashes, refer to “Functions
when Using an External Flash” (p.120).
R Compensates the flash exposure.
Selects the amount of flash discharge (when
[Manual Flash Discharge] is selected).
M Resets the compensation value to the
default setting.
Capture Mode Selectable Flash Mode
R A , B, C, D
G , H, J C , D, E, F, H, K, 9
I , K, L, M C , D, G, K, 9
Guide Number
Sensitivity
Guide
Number
Sensitivity
Guide
Number
ISO 100 Approx. 6 ISO 12800 Approx. 68
ISO 200 Approx. 8.5 ISO 25600 Approx. 96
ISO 400 Approx. 12 ISO 51200 Approx. 136
ISO 800 Approx. 17 ISO 102400 Approx. 192
ISO 1600 Approx. 24 ISO 204800 Approx. 272
ISO 3200 Approx. 34 ISO 409600 Approx. 384
ISO 6400 Approx. 48 ISO 819200 Approx. 544