Nikon D5500 - Manual (Page 73)

51
D
The Count-Down Display
A count down will be displayed 30 s before movie recording ends
automatically. Depending on shooting conditions, the timer may
appear immediately when movie recording begins. Note that
regardless of the amount of recording time available, live view will still
end automatically when the timer expires. Wait for the internal circuits
to cool before resuming movie recording.
D
Recording Movies
Flicker, banding, or distortion may be visible in the monitor and in the
final movie under fluorescent, mercury vapor, or sodium lamps or if the
camera is panned horizontally or an object moves at high speed
through frame (flicker and banding can be reduced using Flicker
reduction;
0 87). Bright light sources may leave after-images when
the camera is panned. Jagged edges, color fringing, moiré, and bright
spots may also appear. Bright regions or bands may appear in some
areas of the frame if the subject is briefly illuminated by a flash or other
bright, momentary light source. When recording movies, avoid
pointing the camera at the sun or other strong light sources. Failure to
observe this precaution could result in damage to the camera’s internal
circuitry.
The camera can record both video and sound; do not cover the
microphone during recording (
0 2). Note that the built-in
microphone may record sounds made by the camera or lens during
autofocus and vibration reduction.
Flash lighting can not be used during movie recording.