Flash photography, Press disp/back to put the changes into eff ect – FujiFilm X100F User Manual
Page 98

82
1
Select
F FLASH SETTING
in the shooting menu and,
after confi rming that ON is
selected for Built-In Flash,
select FLASH FUNCTION
SETTING to display fl ash op-
tions.
EXIT
FLASH SETTING
RED EYE REMOVAL
TTL-LOCK MODE
FLASH FUNCTION SETTING
LED LIGHT SETTING
MASTER SETTING
CH SETTING
Built-In Flash
ON
Q Choosing OFF for Built-In
Flash disables the built-in
fl ash.
FLASH SETTING
RED EYE REMOVAL
TTL-LOCK MODE
FLASH FUNCTION SETTING
LED LIGHT SETTING
MASTER SETTING
CH SETTING
Built-In Flash
ON
OFF
2
Highlight items using the
selector and rotate the rear
command dial to change
the highlighted setting.
MODE
Built-In Flash
3
Press DISP/BACK to put the changes into eff ect.
Q The fl ash will not fi re at some settings, for example
in panorama mode or when the electronic shutter
is used.
Q Choose shutter speeds slower than 1
/
2,000 when using
the fl ash in exposure mode S (shutter-priority AE) or
manual (M).
R The fl ash will not fi re if OFF is selected for SOUND &
FLASH in the
D USER SETTING menu.
R In TTL mode, the fl ash may fi re several times with
each shot. Do not move the camera until shooting
is complete.
R Optional lens hoods are not recommended for use
with the built-in fl ash as they may cast shadows that
cause vignetting.
Red-Eye Removal
Red-Eye Removal
Red-eye removal is available when an option other than
OFF is selected for
F FLASH SETTING > RED EYE REMOV-
AL and
G AF/MF SETTING > FACE/EYE DETECTION SET-
TING is ON. Red-eye removal minimizes “red-eye” caused
when light from the fl ash is refl ected from the subject’s
retinas.
Flash Sync Speed
Flash Sync Speed
The fl ash will synchronize with the shutter at shutter
speeds of 1
/
2,000 s or slower.
Optional Flash Units
Optional Flash Units
The camera can be used with optional FUJIFILM
shoe-mounted fl ash units (
P 141). Do not use third-
party fl ash units that apply over 300 V to the camera
hot shoe.
Flash Photography
Flash Photography
Use the built-in fl ash for additional lighting when shooting at night or indoors under low light.