FujiFilm X100F - Manual (Page 170)

154
Problems and Solutions
Problem Problem Solution Solution
The fl ash does not fi re. The fl ash does not fi re.
• • The fl ash can not be used at current settings The fl ash can not be used at current settings: See the list of the settings that can be used with the fl ash ( : See the list of the settings that can be used with the fl ash ( P P 168). 168).
• • The battery is exhausted The battery is exhausted: Charge the battery ( : Charge the battery ( P P 18) or insert a fully-charged spare battery ( 18) or insert a fully-charged spare battery ( P P 20). 20).
• • The fl ash unit does not support the current drive mode The fl ash unit does not support the current drive mode: The built-in fl ash and fl ash units that do not support burst : The built-in fl ash and fl ash units that do not support burst
photography will not fi re in continuous mode or when used with exposure or dynamic-range bracketing; select photography will not fi re in continuous mode or when used with exposure or dynamic-range bracketing; select
single-frame mode (
single-frame mode ( P P 55). 55).
• • OFF OFF is selected for is selected for D D USER SETTING USER SETTING > > SOUND & FLASH SOUND & FLASH: Select : Select ON ON ( ( P P 115). 115).
The fl ash does not fully The fl ash does not fully
light the subject.
light the subject.
• • The subject is not in range of the fl ash The subject is not in range of the fl ash: Position the subject in range of the fl ash. : Position the subject in range of the fl ash.
• • The fl ash window is obstructed The fl ash window is obstructed: Hold the camera correctly. : Hold the camera correctly.
• • Shutter speed is faster than Shutter speed is faster than 11 // 250 250 s s: Choose a slower shutter speed ( : Choose a slower shutter speed ( P P 50, 53, 82). 50, 53, 82).
Pictures are blurred. Pictures are blurred.
• • The lens is dirty The lens is dirty: Clean the lens ( : Clean the lens ( P P x). x).
• • The lens is blocked The lens is blocked: Keep objects away from the lens. : Keep objects away from the lens.
• • s s is displayed during shooting and the focus frame is displayed in red is displayed during shooting and the focus frame is displayed in red: Check focus before shooting ( : Check focus before shooting ( P P 34). 34).
Pictures are mottled. Pictures are mottled.
• • Shutter speed is slow and the ambient temperature is high Shutter speed is slow and the ambient temperature is high: This is normal and does not indicate a malfunction. : This is normal and does not indicate a malfunction.
• • Pixel mapping is required Pixel mapping is required: Perform pixel mapping using : Perform pixel mapping using H H IMAGE QUALITY SETTING IMAGE QUALITY SETTING > > PIXEL MAPPING PIXEL MAPPING
(( P P 93). 93).
• • The camera has been used continuously at high temperatures or a temperature warning is displayed The camera has been used continuously at high temperatures or a temperature warning is displayed: Turn the cam- : Turn the cam-
era off and wait for it to cool down. era off and wait for it to cool down.
Pictures are distorted. Pictures are distorted. x x or or y y is displayed is displayed: Keep the camera away from magnets. : Keep the camera away from magnets.