Canon PowerShot G7 X Mark II - Manual (Page 5)

5
Initial Preparations
6 Check your card’s write-protect
switch and insert the memory card.
 Recording is not possible on memory
cards with a write-protect switch when the
switch is in the locked position. Move the
switch toward (1).
 Insert the memory card with the label (2)
facing as shown until it clicks into place.
 To remove the memory card, push it in
until you feel a click, and then slowly
release it.
7 Close the cover.
 Lower the cover (1) and hold it down as
you slide the switch, until it clicks into the
closed position (2).
 If the cover will not close, make sure you
inserted the battery pack facing the right
way in step 2.
8 Turn the camera on.
 Press the ON/OFF button.
 The [Date/Time] screen is displayed.
9 Set the date and time.
 Press the [ ][ ] buttons to choose
an item.
 Press the [ ][ ] buttons or turn the [ ]
dial to specify the date and time.
 When fi nished, press the [ ] button.
(2)
(1)
(1)
(2)