Nikon D500 - Manual (Page 2)

SnapBridge Connection Guide (Android TM ) 2
2 Camera: Ready the camera for pairing. The procedure varies depend-
ing on whether the camera supports NFC:
• If the camera displays
an NFC dialog, touch
the NFC antenna on
the smart device to
the camera
N logo
(N-Mark), then wait for
SnapBridge to launch
and proceed to Step 5. To connect without using NFC, press the cam-
era
J button and then proceed to Step 3 when prompted to launch
SnapBridge as shown in the dialog below at right.
• If the camera prompts you to launch SnapBridge,
proceed to Step 3.
Launch prompt
D NFC
For information on enabling NFC and on the location of your smart device’s NFC
antenna, refer to the documentation provided with your smart device. Be sure to
enable NFC before connecting.
D Restarting Pairing at a Later Date
If you didn’t fi nish pairing the fi rst time you turned your
camera on, you can start pairing by selecting Connect
to smart device in the setup menu (digital SLR cam-
eras) or network menu (compact digital cameras) and
touching the smart device to the camera (if you are us-
ing NFC) or displaying the SnapBridge launch prompt (if
you are not using NFC). Connect to smart device
NFC dialog