Parrot Bebop 2 - Manual (Page 9)

9 Updating the Parrot Bebop 2
Updating the Parrot Bebop 2
1. Launch the FreeFlight Pro application.
2. Press
Check for updates to check if any updates are available for the Parrot Bebop 2.
There are 2 ways to update the Parrot Bebop 2:
· via the FreeFlight Pro application (recommended)
· via USB, by downloading the update file from our website. A computer is necessary
for this method.
Note: Ensure that the battery of the Parrot Bebop 2 is in place and fully charged before
updating via USB.
For further information, refer to the Parrot Bebop 2 update procedures section .
Via the app
1. Connect your drone to your smartphone and open the FreeFlight Pro app.
2. In FreeFlight Pro, press
Check for updates .
3. Follow the on-screen direction to download and install updates.
Via USB
1. Go to Parrot Bebop 2’s support page at https://community.parrot.com/t5/Bebop-2/
bd-p/Bebop_2 .
2. Under DOWNLOADS, click Software update to download the update file (.plf).
3. Move that file (bebop2_update.plf) to an empty USB flash drive (formatted to FAT32),
and place it in the USB's root directory. DO NOT RENAME THE FILE.
4. Connect the USB flash drive to the OTG adapter, then insert it into the Micro-USB port
on the Bebop 2, and then power on the drone. Bebop 2 begins updating.