Parrot Bebop 2 - Manual (Page 19)

19 Flying
number of photos stored in the internal memory depends on the selected
format. To choose a photo format, see
Recording settings . Once the
memory is full, it is no longer possible to take a photo.
Note: To obtain high quality photos, make sure that the Parrot Bebop 2
is set in photo mode. To do so, refer to the Recording settings section .
Recording a
video The video recording starts automatically when you press Take off . The
button blinks during recording.
To stop the video record, press . To start a new video, press again.
The video recording stops after 29 minutes of recording.
Note: It is not possible to record a video when the Parrot Bebop 2 is set
in timelapse mode. To deactivate timelapse mode, refer to the
Recording settings section .
Retrieving photos and videos
You can retrieve photos and/or videos taken with the Parrot Bebop 2:
· on your smartphone, using the FreeFlight Pro application,
· on your computer, using a USB/micro USB cable (supplied).
Retrieving photos and videos on your smartphone
1. On your smartphone or tablet, launch the FreeFlight Pro application.
2. Go to
Internal memory . The list of photos and videos stored in the Parrot Bebop 2
internal memory opens.
3. Select one or several photos and/or videos.
4. Tap
Transfer to retrieve the photos and/or videos on your smartphone.
5. Tap Delete if you want to delete the photos and/or videos from the internal memory of
the Parrot Bebop 2.
Retrieving photos and videos on your computer
· Windows :
1. Connect the Parrot Bebop 2 to your computer with the USB/micro USB cable
(supplied).
2. Switch the Parrot Bebop 2 on.