Parrot Bebop 2 - Manual (Page 27)

27 Settings
Network settings
Network Name Change the network name of your Parrot Bebop 2:
1. Change the Parrot Bebop 2 name in the Product name
field.
2. Reboot the Parrot Bebop 2.
Note: The network name of the Parrot Bebop 2 can only
contain letters, numbers and underscores ("_"). It must not
exceed 32 characters in length.
WPA2 Set a password for your Parrot Bebop 2's Wi-Fi network.
Location Select your country.
Wi-Fi band Connect the Parrot Bebop 2 to the 2.4 or 5 GHz Wi-Fi bands.
· The 2.4 GHz Wi-Fi band enables you to fly the Parrot
Bebop 2 from a greater distance. It is generally more
congested than the 5 GHz Wi-Fi band in urban areas.
· The 5 GHz Wi-Fi band enables you to obtain a better
quality connection between the Parrot Bebop 2 and your
smartphone for streaming footage. Check your smartphone
user guide (or the technical specifications) to see whether it
supports connection to the 5 GHz Wi-Fi band. If it does not,
use the 2.4 GHz Wi-Fi band only.
To switch the Wi-Fi band (2.4 GHz or 5 Ghz) manually
without using the application, hold down the on/off button of
the Parrot Bebop 2 for 5 seconds .
Note : The diagram at the bottom of the screen shows the
state of the Wi-Fi channels. Red curves represent congested
channels. Green curves represent less congested channels.
The channel without curves are free.