Parrot Bebop 2 - Manual (Page 13)

13 Flying
The icon indicates that the Parrot Bebop 2 position is detected.
Make sure the Parrot Bebop 2 position is detected before taking off to register the
starting point correctly.
To display the last GPS position of the Parrot Bebop 2:
1. Launch FreeFlight Pro.
2. On the main screen, go to
FLY & FILM > Settings .
3. Press See details .
> The latitude and longitude of the Parrot Bebop 2 position appears in the list.
Taking off
1. Place the Parrot Bebop 2 on a flat and dry surface and in a unobstructed and lit area.
2. Press
Take Off .
> The Parrot Bebop 2 takes off and hovers at approximately 1 meter above the
ground.
Note: Make sure the take-off location of the Parrot Bebop 2 is saved. To do so wait for
the icon to turn green.
Movements
Movements depend on the flight and piloting settings. See the Settings section for further
information. By default, the Joypad option is activated and inverted option is
deactivated.
Joypad mode
Left joypad Right joypad
rotate to the left fly forwards
rotate to the right fly backwards
fly upwards fly right
fly downwards fly left