JVC DLA-Z1 - Manual (Page 57)

Pincushion
Corrects the geometric distortion that occurs when projecting on a curved screen.
0
Setting range: 0 to 16
* This function cannot be used if “Keystone” is set.
.
0 16
High Altitude Mode
For setting the high altitude mode to “On” or “Off”.
Set to “On” when using the projector at a location of low atmospheric pressure (higher than 900 m above sea level).
Display Setup
Back Color
For setting the color of the background to “Blue” or “Black” when there is no signal input.
Menu Position
For setting the display position of the menu.
Signal Display
For setting the display of the input information to “On” or “Off”.
Setting Description
On Shows the input terminal for 5 seconds when input is switched.
Off Not displayed.
Logo
For setting the display of logo during startup to “On” or “Off”.
Setting Description
On Displays the “D-ILA” logo for 5 seconds during startup.
Off Not displayed.
Language
For setting the display language to “English”, “Deutsch”, “Español”, “Italiano”, “Français”, “Português”, “Nederlands”,
“Polski”, “Norsk”, “Русский”, “中文”, “繁體中文”, or “日本語”.
57
Adjust/Set