JVC DLA-Z1 - Manual (Page 53)

Whole Adjust (Pixel) Operation Procedure
For making general adjustments to slight color fringing in the horizontal/vertical directions of the video image.
A
Set “Adjust Area” to “Whole”
B Select “Adjust Color” and “Adjust Pattern Color”
C Select “Adjust (Pixel)”, and press the [OK] button
0
The Adjustment mode is activated, and the selected adjustment pattern and Adjustment (Pixel) window are
displayed.
.
Color A.
BACK GAMMA
Adjust. Color P. A. Area
COLOR TEMP 3D FORMAT PIC. ADJ.
H 0
V 0
Red
Pixel Adjust
Back
Whole Adjust (Pixel)
V (V
er
tical)
H (Horizontal)
Adjustment (Pixel) Window
Adjustment Pattern
D Use the [JKH I] keys to move and adjust the vertical and horizontal pixels of the entire zone
0
The adjustment setting appears at the center of the Adjustment (Pixel) window.
.
Color A.
BACK GAMMA
Adjust. Color P. A. Area
COLOR
TEMP
3D
FORMAT
PIC.
ADJ.
H 0
V 0
Red
Pixel Adjust
Back
Whole Adjust (Pixel)
Remote Control Operation
Guide
Color for
Adjustment
Pixel Adjustment Setting
E After adjustment is complete, press the [BACK] button twice to exit the Adjustment mode
Remote Control Operation Guide
Button Name Function Description of Operation
[GAMMA] Color A. Changes “Adjust Color”.
[COLOR TEMP.] Adjust Switches between “Adjust (Pixel)” and “Adjust (Fine)”.
0
Switches to “Adjust (Pixel)” when “Adjust Area” is set to “Zone”.
[3D FORMAT] Color P. Changes “Adjust Pattern Color”.
[PIC ADJ.] A. Area Switches “Adjust Area”.
0
A zone cursor appears on the adjustment pattern when the “Zone”
setting is selected.
53
Adjust/Set