Adjusting the position – JVC DLA-Z1 User Manual
Page 20
Adjusting the Position
Adjusting the elevation angle of the projector
The height and inclination of the unit (0 to 5 mm) can be
adjusted by turning the feet.
Lift the unit and adjust the four feet.
.
Contract
Extend
Feet
.
4 Locations
Adjusting the position of the image
By using the lens shift feature of this unit, you can shift
the image upward/downward or to the left/right. Set it to
your preferred position.
“Adjusting the Lens According to the Projection
.
Up to about 100% of the
projected image*
Horizontal Position: 0 % (Center)
Vertical Position
Up to about 43% of the
projected image*
Vertical Position: 0% (Center)
Horizontal Position
* 16:9 image
.
120
100
80
60
40
20
0
10
30
20
40
50
Amount of horizontal shift (%)
Amount of v
er
tical shift (%)
Lens shift Range
0
The maximum vertical shift varies with the amount of
horizontal shift. Similarly, the maximum horizontal
shift also changes with the amount of vertical shift.
0
The values on the graph are intended as a guide. Use
them for reference during installation.
20
Set up