ProSoft Technology MVI46-PDPMV1 - Manual (Page 74)

Mailbox Messaging MVI46-PDPMV1 ♦ SLC Platform
User Manual PROFIBUS DPV1 Master
Page 74 of 160 ProSoft Technology, Inc.
March 25, 2011
Command and Response Layout: Set Slave Address
Command Response
Message ID (ID) (ID)
Message information 4002h 0002h
Command 0006h 0006h Set Slave Address
Data size (Size of data) (Size of data) No. of Slave Data bytes (n)
Frame count 0001h 0001h
Frame number 0001h 0001h
Offset high 0000h 0000h
Offset low 0000h 0000h
Extended word 1 Current
Slave Addr.
New Slave
Address
Current
Slave Addr.
New Slave
Address
Extended word 2 Slave Ident Number Slave Ident Number
Extended word 3 No_add_
Chg
- No_add_
Chg
Extended word 4 - -
Extended word 5 - Error Code 1 Error Code 2
Extended word 6 - Error Code 3 Error Code 4
Extended word 7 - Return Code
Extended word 8 Fault Information
Message Data byte 1 Slave Data 1 Slave Data 1
Message Data byte 2 Slave Data 2 Slave Data 2
Message Data byte 3 Slave Data 3 Slave Data 3
... ... ...
Message Data byte "n" Slave Data n Slave Data n
Message Information
Refer to Message Information (page 90).
Current Slave Address
Range 1 to 125; specifies the current address of the slave.
New Slave Address
Range 1 to 125; specifies the new address of the slave.