ProSoft Technology MVI46-PDPMV1 - Manual (Page 19)

MVI46-PDPMV1 ♦ SLC Platform Start Here
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 19 of 160
March 25, 2011
1.7 Downloading the Sample Program to the Processor
To download the sample program from RSLogix 500 to the SLC processor
Note: The key switch on the front of the SLC processor must be in the REM position.
1 If you are not already online to the processor, open the C
OMMUNICATIONS
menu, and then choose D
OWNLOAD
. RSLogix will establish communication
with the processor.
2 Click the D OWNLOAD
button to transfer the sample program to the processor.
3 RSLogix will compile the program and transfer it to the processor. This
process may take a few minutes.
4 When the download is complete, RSLogix will open another confirmation
dialog box. Click Y
ES
to switch the processor from Program mode to Run
mode.
Note: If you receive an error message during these steps, refer to your RSLogix documentation to
interpret and correct the error.