ProSoft Technology MVI56E-MCMR - Manual (Page 146)

Reference MVI56E-MCMR ♦ ControlLogix Platform
User Manual Modbus Communication Module with Reduced Data Block
Page 146 of 225 ProSoft Technology, Inc.
May 13, 2014
6.2.2 Hardware Specifications
Specification Description
Backplane Current Load 800 mA @ 5 VDC
3 mA @ 24 VDC
Operating Temperature 0°C to 60°C (32°F to 140°F)
Storage Temperature -40°C to 85°C (-40°F to 185°F)
Shock 30 g operational
50 g non-operational
Vibration: 5 g from 10 to 150 Hz
Relative Humidity 5% to 95% (without condensation)
LED Indicators Battery Status (ERR)
Application Status (APP)
Module Status (OK)
4-Character, Scrolling, Alpha-
Numeric LED Display Shows Module, Version, IP, Port Status, P1 and
P2 Settings, and Error Information
Debug/Configuration Ethernet port (E1 - Config)
Ethernet Port 10/100 Base-T, RJ45 Connector, for CAT5 cable
Link and Activity LED indicators
Auto-crossover cable detection
Serial Application ports (P1 & P2)
Software configurable
communication parameters Baud rate: 110 baud to 115.2 kbps
RS-232, RS-485, and RS-422
Parity: none, odd or even
Data bits: 5, 6, 7, or 8
Stop bits: 1 or 2
RTS on/off delay: 0 to 65535 milliseconds
Full hardware handshaking control (optional)
Radio and modem support
App Ports (P1, P2) RJ45 (DB-9M with supplied adapter cable)
Configurable RS-232 hardware handshaking
500V Optical isolation from backplane
RS-232, RS-422, RS-485 jumper-select, per port
RX (Receive) and TX (Transmit) LEDs, each port
Shipped with Unit RJ45 to DB-9M cables for each serial port
5 foot Ethernet Straight-Thru Cable (Gray)