ProSoft Technology MVI69-EGD - Manual (Page 83)

Reference MVI69-EGD ♦ CompactLogix or MicroLogix Platform
GE Ethernet Global Data Communication Module
ProSoft Technology, Inc. Page 83 of 96
November 3, 2008
Words Description
46 to 59 C/P Status Data
60 to n Reserved
where n = 60, 120, or 240 depending on the Block Transfer Size parameter (refer to the
configuration file).
Block 2000 C/P Status Data Format
Words Description
0 Status (0=invalid, 1=producing/healthy, 2=pending/unhealthy)
1 Status bit mapped (bit0=error or invalid, bit1=not time synchronized, bits
2 to 15 reserved)
2 Number of times C/P (LSW)
3 Number of times C/P (MSW)
4 Missed count (LSW)
5 Missed count (MSW)
6 Refresh count error (LSW)
7 Refresh count error (MSW)
8 Invalid error bit set by producer
9 Time sync error set by producer
10 Short message error in exchange
11 Long message error in exchange
12 Protocol PVN not set to 1
13 Configuration signature not set correctly
where n = 60, 120, or 240 depending on the Block Transfer Size parameter (refer to the
configuration file).
Block 9250 Request Block (General Status)
Words Description
0 9250 Command code value
1 to n Reserved
where n = 60, 120, or 240 depending on the Block Transfer Size parameter (refer to the
configuration file).
Block 9250 Response Block (General Status)
Words Description
0 9250 Command code value
1 Block write ID requested
2 Program scan counter
3 Product code bytes 0 & 1
4 Product code bytes 2 & 3
5 Revision bytes 0 & 1
6 Revision bytes 2 & 3
7 Op bytes 0 & 1
8 Op bytes 2 & 3