ProSoft Technology MVI69-EGD - Manual (Page 42)

MVI69-EGD ♦ CompactLogix or MicroLogix Platform Ladder Logic
GE Ethernet Global Data Communication Module
Page 42 of 96 ProSoft Technology, Inc.
November 3, 2008
3.2 Adding the Module to an Existing MicroLogix Project
If you are installing and configuring the module with a MicroLogix processor,
follow these steps. If you are using a CompactLogix processor, refer to the
previous section.
The first step in setting up the processor ladder file is to define the I/O type
module to the system. Start RSLogix 500, and follow these steps:
1 In RSLogix, open your existing application, or start a new application,
depending on your requirements.
2 Double-click the I/O Configuration icon located in the Controller folder in the
project tree. This action opens the I/O Configuration dialog box.
3 On the I/O Configuration dialog box, select "Other - Requires I/O Card Type
ID" at the bottom of the list in the right pane, and then double-click to open
the Module dialog box.