PLANET KVM-1600 - Manual (Page 24)

- 20 -
k. When you finish the set up of PC name and get out of
OSD setting mode, you will find the PC name showed at
the up-left corner of monitor. Now, you can use ESC key
to clear the message right away if you don’t need it.
l. If you want OSD returning back to factory default value,
you can execute “SCROLL LOCK”, “SCROLL LOCK” ,
“R” keys in order. The Seven segment LEDs on the front
panel will be flashed during the refresh process.
When the OSD value back to default setting, the seven
segment LEDs on the front panel will stop flashing.
102
☼SYSTEM 02
ROM REFLASH