PLANET KVM-1600 - Manual (Page 12)

- 8 -
Step 5 Connecting VGA port of PC(s) to the KVM
Switch
Now the PC connections will be made with the monitor (VGA)
connections first. Connect a VGA cable (15-pin HDDB Male /
Male) with the Male side to both of the PC and the rear panel
of the KVM switch to the connector labeled VGA. Repeat this
for all PCs.
DC 12V
8 7 6 5 4 3 2 1 Console port Daisy-chain in
Step 6 Connecting Mouse port of PC(s) to the
KVM Switch
Connect the first computer’s mouse cable to the KVM Switch.
If using a PS/2 cable, connect one end to the PS/2 mouse port
on the computer, and the other end to the PS/2 mouse port on
the back of KVM Switch. If using a serial mouse cable (op-
tional), connect one end to a DB-9 serial port on the computer,
and the other end to the DB-9 serial mouse port on the back of
the KVM Switch. If you need Serial DB-9 to PS2 Mini Din 6 pin
adapter, please contact your supplier.
DC 12V
8 7 6 5 4 3 2 1 Console port Daisy-chain in
Step 7 Connecting Keyboard port of PC(s) to the
KVM Switch
Connect the first computer’s keyboard cable to the KVM
Switch. Using another PS/2 cable connect one end to PS/2
The rear side of PC
The rear side of PC
The rear side of PC