PLANET IPM-1200x Series - Manual (Page 7)

7
Connecting EMD
An Environmental Monitored Device (EMD) that is connected to sensors for
detecting temperature, humidity, water level, and so on can be connected to the
IPM-1200X Series with the console port. The EMD can also be connected to alarms
or indicators and controlled through the IPM-1200X Series. Connect the EMD to the
console port as shown:
Smoke Detector Motion
Detector
Door Open
Detector
EMD
or or
If applicable, connect external contact closure inputs to the screw terminals on the
EMD. Just like sensor detector or any device with normally-open or closed.
After connecting to EMD, open a browser from a PC in the network. The
temperature and humidity status is automatically displayed on the PDU Status
page.