PLANET IPM-1200x Series - Manual (Page 6)

6
2. In default, IPM-1200X Series is DHCP Client enable. If you don’t have DHCP
Server in your network, please click “Set IP” button. Then enter a new IP
address that in the same segment of your configuration PC. Please press “OK”.
3. Please press “Browse” button, then you will see a dialog box asking you to
enter the User Name and Password. In default, please enter “admin” as your
User Name and Password for first time configure IPM-1200X Series. Please press
“OK”.
4. Then the IPM-1200X Series configuration web page will appear as below. You
can check and start the management of the IPM-1200X Series.