PLANET IPM-1200x Series - Manual (Page 5)

5
3. Initial IP Power Manager
The following procedure describes the basic steps needed to set up the IPM-1200X
Series:
1. Please insert User’s Manual and Utility CD into the CD-ROM drive to initiate the
autorun program. Once completed a menu screen will appear.
2. Click on “Initial Utility” hyper link to initiate the installation. If the autorun
program is not process in your PC, you can click the “Start” button and choose
“Run”. (Suppose “E” is your CD-ROM drive). When the dialog box appears, enter
“E:\Utility\Setup.exe” and press enter key. You will see the dialog box as below.
3. Please press “Discover” button to find out your IPM-1200X Series.
1. Please select your IPM-1200X Series in the Device List and click “Modify” button
to enter the user account and password. In default, user account and password
is “admin”. Please press “OK”.