PLANET MH-3400 - Manual (Page 5)

5
 Ethernet Port can be set as a:
LAN Port: l The Security Router supports 1 LAN port by default.
WAN Port: l The Security Router supports default 4 WAN ports. The second
WAN port can be configured to LAN or DMZ.
DMZ Port:
l The router supports 1 DMZ port configured with LAN2/WAN4, the
default is set as WAN4.
2.3 LED & Button definition
LED Color Status Description
PWR
Green Steady Power On
Off Off Power Off
DIAG Amber
Steady on System is crashed.
Blinking
System is on self-test after power on the
device.
Off System is ready.
WAN / DMZ
Link /Act
Green
Steady on Port has been connected & Get IP
Blinking Transmit data.
Off
Not get the IP address, even the port has
been connected.
LAN:
Link / Act
Green
Steady on LAN port has been connected.
Blinking Transmit data.
LAN / WAN
/ DMZ
Speed
Green Steady on Works on 1000Mbps
Amber Steady on Works on 100Mbps
Off Off Works on 10Mbps
USB:
Link /
Connect /
Act
Green
Steady on
USB is connected and the device is
supported.
Blinking Packets are transmitting through USB port
Off Off Not connect with any USB device
Button Action Description
Reset
Press for 5 Secs
Warm Start
DIAG indicator: Amber LED flashing slowly.
Press Over 10 Secs
Factory Default
DIAG indicator: Amber LED flashing quickly.