PLANET MH-3400 - Manual (Page 10)

10
3.3 Remote Management
The function can enable users to manage the security router at remote sites and to
allow technical person to assist you in solving network problem.
Step 1. Go to Firewall  General Policy.
Figure 3-6. The firewall setting button
Figure 3-7. General Policy setting page
Step 2. Click Enable to active Remote Management. And then enter the control
port you want to use. The default value is 8080.
Step 3. Click Apply to save the configuration. And you can type the
http://WAN IP address:8080 to access the router from the remote
side.