PLANET MH-2300 - Manual (Page 15)

15
Step 5. This step confirms what interface addresses have been assigned to
MH-2300.
Confirmation on Interface Settings
Step 6. Installation is completed after clicking Finish from the previous step.
Step 7. Under Network > Interface, set as shown below:
 Click Modify corresponding to the Port 1.
 Select “LAN” for Interface Type.
 Select “Transparent Bridging” for Connection Type.
 Tick the boxes of “Ping/ Tracert”, “HTTP” and “HTTPS”.
 Click OK.
Configuring the LAN 1 Interface Settings