PLANET VIP-251T - Manual (Page 38)

Some ISP supply QoS services. The QoS services can make the best of improving the quality of Voice
application. You can get the settings from the ISP if they supply QoS services. Please connect with
them if you need it.
If in you network has VLAN, you can set a vlan ID value in VLAN ID column.
Dial Rule
You can set your own Dial Rule. The Dial Rule will take effect when making a call if you enable the “Dial
Rule” in the Equipment Manage/Device Manage page. One line shows one Dial Rule. PRI decrease by
lines.
Items Descriptions
Call Mode
Choose one mode from Line1, Line2, IP Dial.
- Line1 is for SIP-1
- Line2 is for SIP-2
- IP Dial is for IP peer to peer dial.
Matching Number Effictive when Call Mode is Line1 or Line2, there are 3 matching mode
- Mode 1: Match character strings fully. E.G: “01058092777” means
matching the right number.
- Mode 2: Match character strings fully. E.g.: “01058092777#” means
matching the right number.
- The difference between Mode 1 and Mode 2 is: in mode 2:if user
dial 01058092777, the number will be sent out immediately, need
not user to dial end char “#”; But in mode 1, if user dial
01058092777,the number will not be sent out immediately, you
must dial end char “#” to realize sending out number immediaterly
or wait 5s for IP Phone sending out number.
- Mode 3: Match character strings. “010xxxxxxx8” means matching
the numbers that begin with “010”, end is “8” and length is 11.
38