PLANET ATA-150 - Manual (Page 9)

LED Display of ATA-150
PWR Power is supplied to the device.
LNK/ACT
OFF: the device is disconnected to LAN.
ON: the device is connected to LAN.
Phone
OFF: the phone is idle.
ON: the phone is in use (off-hook).
Blinking: the phone is ringing.
LED Display of ATA-150S
PWR Power is supplied to the device.
LNK/ACT
OFF: the device is disconnected to LAN.
ON: the device is connected to LAN.
RING1
OFF: the phone is idle.
ON: the phone is in use (off-hook).
Blinking: the phone is ringing.
RING2
OFF: the phone is idle.
ON: the phone is in use (off-hook).
Blinking: the phone is ringing.
1. Machine default IP is http://192.168.0.1 . Press RESET
button on rear panel over 5 seconds will reset the VoIP
Phone Adapter to factory default value. (Except speed
dial and call forward settings)
2. Using the power supply that is not the one included in
package will cause damage and void the warranty for this
product.
3. Be noted to use the switching type power supply for
regular operating.
Í Note
- 9 -