PLANET ATA-150 - Manual (Page 19)

Set PPPoE connection idle time for Connect on Demand. Idle Time
Default : 5
Set IP type if Dynamic IP or Static IP at PPPoE connection. LAN Physical
Default : Dynamic IP
LAN IP Address of the ATA at Static IP type. IP Address
Default : 0.0.0.0
LAN Mask of the ATA at Static IP type. Subnet Mask
Default : 0.0.0.0
After confirming the modification you’ve done, please click on the SUBMIT button to apply settings
effective and the ATA will be reload page automatic by itsely, that you must to afresh enter the final
modification IP address for logon web management.
Connection Type Description – PPTP
- 19 -