PLANET ATA-150 - Manual (Page 20)

PPTP Set LAN interface as PPTP mode.
Set IP type if Dynamic IP or Static IP at PPTP connection. Mode
Default : Dynamic IP
LAN IP Address of the ATA at Static IP type. IP Address
Default : 0.0.0.0
LAN Mask of the ATA at Static IP type. Subnet Mask
Default : 0.0.0.0
Gateway of the ATA Gateway
Default : 0.0.0.0
Set PPTP Server IP address. Server IP Address
Default : 0.0.0.0
Set user name of PPTP connection User Name
Default : Null
Set password of PPTP connection Password
Default : Null
Please be noticed that the Utility Tool is only designed
Í Note
for the LAN environment setting. If the “Connect Type” is
“PPPoE”, the Utility Tool can NOT find the device.
- 20 -