PLANET NVR-3250 - Manual (Page 63)

To add an FTP server,
1. Start by giving a name to the server that you are adding to the recorder.
2. Enter the hostname or the IP address of the FTP server.
3. Enter the communication port of the FTP server (usually port 21).
4. Enter the username and password of the FTP server if it’s required
5. Check “Use Passive Mode” if it’s required or leave it unchecked to use active mode.
6. Click “Test” to verify if all information is entered correctly and the connection to the FTP server can be
established successfully.
7. Click “Apply” for the settings to take effect.
63