1 using the setup wizard, Sing the, Etup – PLANET NVR-400 User Manual

Page 14: Izard

Text mode
Original mode

4.1 Using the Setup Wizard

The device’s Setup Wizard lets you configure your device easily and quickly. The wizard
will guide you through the necessary settings step-by-step.
To start the wizard, click Setup Wizard in the menu bar.

Step 1. LAN Setup

Enter the Hostname for the device.

Select Start UPnP to enable the device’s Universal Plug and Play function.

If your network uses a proxy server, select Use proxy and enter the IP/Port values.

Step 2. TCP/IP Setup

Select DHCP when your network uses the DHCP server; or select Static IP to

assign the IP address for the device directly.
For more information of TCP/IP settings, refer to the Lan section in Web
Configuration Utility.

NVR-400 User Guide

- 13 -