PLANET NVR-3210 - Manual (Page 14)

13
LEDs Color Description
System Red
Firmware upgrade: blinking
System failure (AP failed): off
System normal: solid
Event Green
Event recording: solid
No event: off
Power Green
Power on / Restart / Reset to default / OS fail: stays
solid
Button Description
Reset/Restart
Press and release for restart.
Press over 3 seconds to reset to default settings. Don't release
the button until the system LED blinks.
Power Press to start or shut down.
Rear panel
Gigabit
Ethernet 1
Line in /
Line out / MIC.
Gigabit
Ethernet 2
AC Power Power
Supply Fan
VGA Port E-SATA USB x 4 System Fan DI x 8, DO x 4
Connector Description
VGA VGA output
Ethernet Dual 10/100/1000Mbps network for redundancy
USB Connect your USB flash disk for firmware upgrade and backup
E-SATA External E-SATA HDD
Audio Line in / Line out / Mic.
I/O DI x 8 / DO x 4