PLANET ICA-HM127 - Manual (Page 10)

Rear View
Item Description
1. MIC IN
Connects to external microphone to input audio signal to IP camera.
Use 3.5mm audio cable.
2. AUDIO OUT
Connects to external audio amplifier to output voice. Use 3.5mm
audio cable.
3. SD
Inserts SD card for video recording. Maximum 32GB of SD-HD card
supported.
4. RESET
When the IP camera is not functioning properly, you can use a pen or
similar object to press this reset button to reset the IP camera. You
can also press and hold this button for more than 5 seconds to clear
all settings of IP camera, include administrator password, then the IP
camera will download default setting automatically.
5. ETHERNET
Connect to your local area network by Ethernet cable.
Left LED: Power indicator
Right LED: Data transfer
6. DI/DO
(Digital Input / Digital
Output) Digital input / output dry contacts. Connects to external peripherals by
wire. See next page for pin definitions.
WARNING: DO NOT CONNECT POWERED CABLE!
7. DC12V Connect to DC power adapter output
8. VIDEO OUT Output video signal, connect to external video devices
9. DC lens drive Adjust the DC lens driving ability
9