PLANET ICA-HM131 - Manual

ICA-HM131
ICA-HM131R ICA-HM131
ICA-HM131R
their respective owners. Copyright © 2010 PLANET Technology Corp. All rights reserved.
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528
Email: [email protected] www.planet.com.tw
Quick Guide Quick Guide
2011-AB5350-000
VERIFY THE CONTENTS INSIDE PACKAGE BOX
The package should contain the items plus ICA-HM131 / ICA-HM131R. If any item is missing or damaged, please contact the seller immediately
Quick Installation Guide
Step 1 : Connecting Network
Step 4 : System Requirement
To perform the IP Camera via web browser, please ensure your PC is in good network connection, and meet system requirements as
described below for appropriate setup and optimal view quality.
Step 2 : Computer Network Setup
Set your computer’s IP address to 192.168.0.x, where x is a number
between 1 to 254 (except 20 where is being used for the camera by
default). If you don’t know how to do this, please ask your network
administrator.
Use web browser (Internet Explorer 6.0 or above) to connect to
192.168.0.20 (type this address in the address bar of web browser).
You’ll be prompted to input user name and password:
admin / null
(without password).
Further Configuration
For detail configuration, please check user’s manual on the bundled CD.
If you have any other questions, please contact the dealer where you purchased this product or you can contact PLANET directly at the following
email address: [email protected]
Step 3 : Login Prompt
x 1
Accessories kit
x 1
x 3 x 3
Note : Please properly keep the L-type spanner after the installation
ICA-HM131/HM131R
Ethernet PoE Switch User PC
(192.168.0.X)
Items System Requirement
Personal Computer 1. Intel ® Pentium ® M, 2.16 GHz or Intel ® Core TM 2 Duo, 2.0 GHz
2. 2 GB RAM or more
Operating System Windows VISTA or Windows XP
Web Browser Microsoft Internet Explorer 6.0 or later
Network Card 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
Viewer ActiveX control plug-in for Microsoft IE
CD-ROM
1. Lens
2. Reset Button
3. Focus Fixed Screw
7. RJ-45 LAN Socket
4. Tilt Fixed Screw
5. Microphone
6. Micro-SD Card slot
ICA-HM131 / ICA-HM131R Top View
Item Description
1. Lens Rotate the lens right/left to adjust focus.
2. Reset Button Restore to default setting.
3. Focus Fixed Screw Loosen the screw to adjust the lens.
4. Tilt Fixed Screw Loosen the screw to adjust tilt angle.
5. Microphone The IP Camera’s built-in microphone.
6. Micro-SD Card slot User can insert a micro SD card into this slot for event recording.
7. RJ-45 LAN Socket The LAN socket is a RJ-45 connector for connections to 10/100Base-TX Fast Ethernet cabling.
The LAN socket is compliant with IEEE802.3af standard PoE interface, and IP Camera is necessary
supplied power through PoE Switch/Hub device.