PLANET ICA-HM100 User Manual

Quick guide

ICA-HM100
ICA-HM100W

PLANET Technology Corporation

11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C.

Tel: 886-2-2219-9518

Fax: 886-2-2219-9528

Email: [email protected]

www.planet.com.tw

Quick Guide

2011-AB5320-000

Step 2 : (Optional) the utility installs and run the utility to locate the IP camera

Step 1 : Connecting Network and AC Adapter Power

VERIFY THE CONTENTS INSIDE PACKAGE BOX

The package should contain the items plus ICA-HM100/ICA-HM100W. If any item is missing or damaged, please contact the seller immediately

CD-ROM

Power adapter

Antenna *

Quick Installation Guide

► Please insert the CD-ROM supplied in the product package,

and the CD will automatically run the installation, if not,
please click the Utility hyperlink to install.

Camera stand

Further Configuration

For detail configuration, please check user’s manual on the bundled CD.
If you have any other questions, please contact the dealer where you purchased this product or you can contact PLANET directly at the following email
address: [email protected]

Step 3 : (Optional) Setup Camera IP address

Step 4 : Bring up the web page for further

con-figuration

NOTE : If you are not familiar with IP setting, remain with the default

setting.

► Select the IP Camera you want to configure and click the

browser icon

► You will connect to IP Camera via web browser

automatically; The IP Camera will prompt for logon
username / password, please enter

admin / (no

password ) as the default user name and password

Step 5 : (Optional) Wireless setup for ICA-HM100W

Step 6 : (Optional) Wireless connection for ICA-HM100W

► Go to the Network of Website ¢ Wireless setting page for wireless configuration

► IP Camera will reboot
► Remove the lan cable after got the reminder window
► The wireless connection will in effect

(DHCP Client or 192.168.0.2)

802.11 b/g/n Wireless Access Point

Remark 1 : Antenna only for ICA-HM100W

Current existing IP Cameras in local network

Search the IP Camera in the network

To view the IP Camera’s pictures that you selected

To modify the IP parameters of the selected IP Camera

To view and assign the available wireless network

Shows the selected IP Camer images

► The IP Wizard II Utility description

► Selecting the IP Camera you want to configure, and press the

button

► Key in the desired IP address, and press button
► Input username and password, default are

admin / (no password).

Then press button.

Press “Reload” to search Access Point nearby

Select the Access Point you would like to connect

Enter your authentication key into the fields if required

Press “OK” to make settings effective

ICA-HM100

/ICA-HM100W

Ethernet Switch

User PC

(192.168.0.X)

Remark 2 : ICA-HM100 also supports IEEE802.3af, be reminded to power either from AC adapter or PoE switch

► After the camera utility is launched, all cameras found in your

local area network will be displayed.