PLANET ICA-500 - Manual (Page 6)

4
Camera administration
PLANET Internet Cameras provide GUI (Web based, Graphical User Interface) for machine
management and maintenance.
When you installed your IP camera over your network environment,
To start web configuration, you must have one of these web browsers installed on
computer for web management
• Microsoft Internet Explorer 6.0 or higher with Java support
Default LAN interface IP address of ICA-500 / ICA-300 / ICA-302 / IVS-100 is
192.168.0.20. You may now open your web browser, and insert http://192.168.0.20
in the address bar of your web browser to logon web configuration page.
Login screen will be prompted, please enter: admin as username and leave blank for
password to continue machine Web Management.
If difficulty is met, please refer to the following steps to establish the connection:
• Your PC can establish a physical connection to the Internet Camera. The PC
and the PT Internet Camera must be directly connected (using the LAN port
on the PT Internet Note: If you have problem on Camera) or on the same
LAN segment. That is, the PC must be configured to an IP address and subnet
mask in 192.168.0.x segment. For example: IP: 192.168.0.2, subnet mask:
255.255.255.0.
• The Internet Camera must be installed and powered ON.
• If the Internet Camera’s default IP Address (192.168.0.20) is already used by
another device, the other device must be turned OFF until the Internet Camera
is allocated a new IP Address during configuration.